admin@rothmancompressor.com 
0086-13663713257
What requirements should be met when assembling the lubrication system of the air compressor?
1. After assembly, the tightness test shall be conducted on the pipelines, valves, filters and coolers of the lubrication system according to the pressure specified in the equipment technical documents. If there is no document, the test shall be conducted according to the rated pressure without leakage.
2. The oil pipe shall be vented and drained first, and then connected with the oil supply and lubrication point.
3. The oil pipe shall be free from sharp bending, twisting and flattening.
4. The transmission mechanism connected between the crankshaft and the oiler or between the crankshaft and the oil pump shall operate flexibly.
0086-13663713257
admin@rothmancompressor.com